Carbon build-up valves cleaner, foam effective formula, cleans

4.5 (576) · € 20.00 · In Magazzino

MotorPower care Carbon Cleaner: The latest technology formula reaches deep areas, dissolves & removes carbon residues from the cylinder head area (valves, piston crown, EGR, turbocharger, intake manifold). Product tested for effectiveness & safety on engine components. Product Properties: - Removes operationa

MotorPower care Carbon Cleaner:

The latest technology formula reaches deep areas, dissolves & removes carbon residues from the cylinder head area (valves, piston crown, EGR, turbocharger, intake manifold). Product tested for effectiveness & safety on engine components.

Product Properties:

- Removes operationally caused deposits from the entire combustion chamber and cylinder head area (valves, piston ring, piston crown)

- No dismantling is required for the intake manifold or cylinder head.

- Deep & effective cleaning reaches difficult-to-access areas.

- Non-corrosive product does not attack seals.

- For Gasoline & Diesel engines.

Instructions:

1- Shake the can so well before use.

2- The vehicle engines need to be warm when you start the process.

3- Take 1 spark plug out (Gasoline engines) or injector on (Diesel engines).

4- Check the intake valve with an endoscope, and turn the engine manually till the intake valves are open all the way.

5- Spray MotorPower care Carbon cleaner in the combustion chamber till the white foam comes out of the access port.

6- Let it react for 20 minutes, then repeat K1 another 2 times (total 3 times if needed).

7- Extract the resulting emulsion with a vacuum (extractor).

8- Restore the spark plug and turn the engine on, warm it up for 1-2 minutes and then remove the second cylinder spark plug and repeat steps 5 – 6 -7 & 8 till you finish all the cylinders.

- After cleaning all cylinders with MotorPower carbon cleaner, we recommend induction cleaning.

9- Erase Codes.

* Another way to clean carbon build-up on valves: Remove the intake manifold. You need to use a heat gun to warm up the valves & port, then spray the carbon cleaner directly on the valves, let it react for 10min, then repeat if needed.

- 500ml can treat a 6-cylinder engine.

Carbon build up on intake valves..who has had it/cleaned it

MotorPower care Carbon Cleaner:, The latest technology formula reaches deep areas, dissolves & removes carbon residues from the cylinder head area

Carbon build-up valves cleaner, foam effective formula, cleans also EGR turbo easy to use, not required disassembling high performance motorpower care

Techniques for Removing Carbon Deposits in the Combustion Chamber

Seafoam intake valve cleaning part 2 WOW!

LIQUI MOLY Petrol Engine Intake Decarb - 366g

Carbon build-up valves cleaner, foam effective formula, cleans also EGR turbo easy to use, not required disassembling high performance motorpower care