Shelly 2.5 as pulse relay to switch existing dimmer - Configuration - Home Assistant Community

I have a dimmer (Jung 1731DD) which is mainly operated manually, but I would like to switch this dimmer on in case I’m not at home. This dimmer can be switched on/off using a pulse signal (relay on for 100ms). To make this work I have a Shelly 2.5.: One port is used as pulse relay (shelly is configured to automatically switch off after 0.1s). the other port of the shelly (always on) to feed the dimmer and measure the power consumption of the dimmer The shelly 2.5 is controlled via MQTT. C

Wiring a Shelly plus 1 - Hardware - Home Assistant Community

Ventilation: Shelly 2.5 with 3-level switch - ESPHome - Home Assistant Community

Shelly support group (English Version), # **How to use Shelly RGBW2 with long LED strips

Shelly support group (English Version), First time I've had a blown shelly after many many installations

Shelly Dimmer 2

Setting Shelly dimmer switches to max brightness on press - Node-RED - Home Assistant Community

Shelly Dimmer 2 'Randomly' switching on - Configuration - Home Assistant Community

ESPHome - Home Assistant Community

Smart Dimmer by Shelly + Excellent Home Assistant Integration

Shelly 2.5 switches unavailable in HA when upgrading to 0.118.4 with Shelly vanilla firmware ⩾ 1.9.0 · Issue #43740 · home-assistant/core · GitHub

Can Shelly's work with 2 way switches?