2-Wire RS485 Surge Protector (Industrial / Passive) – CommFront

The SPD-485-1 is a passive, rugged, industrial-grade, 2-wire RS485 surge protector that can be used to limit the voltage surges and spikes introduced to the RS485 data lines. This industrial RS485 surge protector features 3-stage surge protection – Gas Discharge Tubes (GDT), protection resistors, and Transient Voltage Suppressors (TVS) - for maximum protection. The SPD-485-1 is designed to connect in series to the input of the protected equipment; when a high-voltage surge is introduced into the input, the GDT conducts electric current after becoming ionized, which in turn discharges the high-voltage surge to the earth ground. The excessive voltage will be further clamped to a safe range that the equipment can accept by the TVS. This industrial 2-wire RS485 surge protector features passive circuitry designs and thus requires no external power; it supports data rates up to 10Mbps and can be used

RS232 RS485 RS422 TTL USB Serial Fiber Optic Converters / Ethernet Data Converters

Opto-Isolated RS485 Hub / Splitter (Industrial) – CommFront

FREE RS232 RS485 RS422 TTL Serial Port Protocol Analyzer Monitor Terminal Software

RS232 RS485 RS422 TTL USB Serial Fiber Optic Converters / Ethernet Data Converters

Industrial RS485 Surge Suppressor / Protector

RS485 to TTL Converter / TTL to RS485 Adapter

RS422 / RS485 to TTL Converter / TTL Repeater (Industrial) – CommFront

COMMFRONT Industrial 4-Wire RS422 / RS485 / RS232 Surge Protector, Passive, 3-Stage Surge Protection, DIN-Rail Mount

Type N F/F Coaxial RF Surge Protector, 800MHz - 2.5GHz, 300W, IP67, 24 V Max., 25uJ, 20kA, Hybrid, Bracket Down, Hole Mount

Surge Suppressor Units, Surge Arrestors