Buy PoE Splitter with MicroUSB Plug - Isolated 12W - 5V 2.4 Amp - Affordable Price

4.7 (235) · € 19.50 · In Magazzino

PoE Splitter with MicroUSB Plug - Isolated 12W - 5V 2.4 Amp and 4000+ products for makers at . Worldwide shipping at the same day. Explore and buy right now!
PoE Splitter with MicroUSB Plug - Isolated 12W - 5V 2.4 Amp Power over Ethernet (PoE) splitters can make your project wiring a breeze - and best of all they work to connect any 802.3af-capable router to any Ethernet device, even if it doesn\'t natively support PoE! The splitter takes a unified PoE signal (data and power) from one RJ-45 cable, and then separates the data (Ethernet) and power (5 VDC regulated) into two different lines for non-PoE devices. This is an economical, practical, high-performance, and reliable Isolated 5V 2.4A PoE Splitter with MicroUSB Plug based on IEEE 802.3af standard. It can divide power and data signals from a network cable, and can be used with any PoE injector that is compatible with IEEE 802.3af, and supply power and data for non-PoE network equipment. Connect to your PoE switch or hub, then on the other side of the Ethernet cable, you\'ll get Ethernet and a high quality 5V power supply, up to 2.4 Amps. This is perfect for use with a Raspberry Pi model B, B+, Pi 2 or Pi 3 since those have Ethernet and micro USB power, and 2.4 Amp is plenty of current for even the most accessorized Pi. (It isn\'t a good match for the Pi Zero or A+ because those don\'t have Ethernet, although you could use an Ethernet hub.) It also works great with Arduino boards and compatibles that have Ethernet and micro USB like the Seeed Cloud or an Arduino-compatible with an Ethernet shield - just check that the compatible has a micro USB power input! Please note that like many active PoE splitters, there\'s a minimum load requirement of at least 100mA on the 5V power supply. We don\'t think this is going to be a problem since anything with Ethernet will tend to draw 200mA+, but please keep it in mind! Technical Details: Ethernet cable length: 205mm / 8\ MicroUSB cable length: 205mm / 8\ Body dimensions: 80mm x 30mm x 24mm / 3\ x 1\ x .8\ Features: IEEE 802.3af compliant Supports 10/100M data transmission (not for Gigabit ethernet) Supports 48V Unsolicited Power Over Ethernet PoE Switches/Hubs/Adapters with a 44V-57V power voltage input Operation temperature: 20°C - 45°C Storage temperature:- 30°C - 70°C Isolation: 2.5kV Power Input: 44~57V DC Power Output: 5V DC 2.4A Product Weight: 54.1g / 1.9oz

Raspberry Pi 3 Model B+ with 1.4GHz Quad Core

PoE Texas PoE Power for USB-C Devices, Including Google WiFi & Raspberry Pi – for POS Systems, Digital Signage & More, 802.3af POE to 5 Volt Splitter, Extend Power Delivery Up

Passive PoE Injector Cable Set

DSLRKIT Gigabit Raspberry Pi 3B+ 3B Plus PoE Kit (Splitter + Injector) Micro USB 5V 2.4A - AliExpress

3.2 USB-C to USB-A Cable, USB-IF Certified, 3-ft

PoE Splitter with MicroUSB Plug - Isolated 12W - 5V 2.4 Amp

10/100M IEEE802.3at/af Power Over Ethernet PoE Splitter Adapter for IP Camera 48vto12V Isolated POE

Perfect for Raspberry Pi 4, Google Wifi, and more. Easily convert Power Over Ethernet from your existing PoE switch, with an input voltage range of 44v to 56v POE and an output voltage of 5 volts 2 amp for one device with a USB-C connector. Extends 5 volts of power to devices up to 328 feet away. Standard USB-C plug fits any USB-C device and is compatible with your existing IEEE 802.3af PoE switch or injector (sold separately). 10/100 Mbps data rate.