eSun High Speed PLA-HS 1.75mm 1kg Roll - (3 Colours Available)

4.6 (364) · € 16.50 · In Magazzino

Combining remarkable strength with high-speed printing capabilities, eSun PLA-HS filament promises not just to fulfil but to exceed all your 3D printing expectations. Fast Print Speed By balancing the melt flow index and melt temperature, the ePLA-HS (high-speed PLA) can flow smoothly in a molten state and cool fast d
Combining remarkable strength with high-speed printing capabilities, eSun PLA-HS filament promises not just to fulfil but to exceed all your 3D printing expectations. Fast Print Speed By balancing the melt flow index and melt temperature, the ePLA-HS (high-speed PLA) can flow smoothly in a molten state and cool fast during printing. In this way, it can achieve smooth printing without clogging and fast cooling without deformation during high-speed printing. The maximum manufacturer quoted print speed for eSun PLA-HS filament is 350mm/s. However, perfect results at higher speeds have been achieved successfully on our Creality K1 Max printers using 0.4mm nozzles. Exceptional Printability Esun's PLA-HS filament offers outstanding printability. Its excellent adhesion to the printing bed, minimal warping, and low shrinkage make it a dream to work with, for beginners and experienced users alike. Its compatibility with a wide range of FDM printers is a testament to its versatility and user-friendliness.___Note: This product is named as PLA-HF before June 2023. PLA-HF and PLA-HS are the same material. Printing Settings: Printing Temperature：210-230℃ Bed Temperature：45-60℃ Printing Speed：<=600mm/s

eSUN PLA+ 1.75mm 3D Filament 1KG – eSUN Offical Store

2 Rolls eSUN 3D Printer Filament PLA+ PLA Plus 1.75MM PLA 1KG Filament 3D Printing

【Designed for High Speed Printer】Under same model and printing time, eSUN PLA HS can print 3-5 times faster at a speed of 250mm/s than ordinary PLA at

eSUN PLA HS High Speed PLA Filament 1.75mm, 3D Printer Filament Fast Print High Flow Speedy PLA, Dimensional Accuracy +/- 0.03mm, 1KG Spool (2.2 LBS)

PLA+ Light blue 3D filament is an upgrade compared to normal eSun PLA filament. It is suitable for all 3D printers and replaces PLA completely. The material is made entirely from corn grain suitable for printing of larger objects and stringing problems are from the past with PLA+. It is easy to 3D print with normal PLA settings at about 205 degrees using any 3D printer. Experience a smoother 3D print experience with this great material.