Pro Micro ATMEGA32U4 5V 16MHz Free Pins Arduino Leonardo Pro Micro Compatible

4.8 (352) · € 4.00 · In Magazzino

The USB transceiver inside the 32U4 allows us to add USB connectivity on-board and do away with bulky external USB interface. This tiny little board does all work for Arduino tricks that you're familiar with: 4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx.

Arduino Pro Micro Pinout: Connection Pins for the ATmega32U4-Based Microcontroller

OSOYOO Pro Micro Board ATmega32U4 Leonardo 5V/16MHz Module Board Type

KOOKYE 5PCS Pro Micro ATmega32U4 5V/16MHz Module Board with 2 Row pin Header for Arduino Leonardo - Imported Products from USA - iBhejo

Pro Micro Leonardo - 5V/16MHz

Leonardo Pro Micro ATmega32U4 16MHz 5V Replace ATmega328 For Arduino Pro Mini

ATMega 32U4 running at 5V/16MHz Supported under Ard-uino IDE v1.0.1 On-Board micro-USB connector for programming 4 x 10-bit ADC pins 12 x Digital I/Os p Note:When you open the Ard-uino IDE software, pls go to the Tool and choose the board Ard-uino Leonardo - 1. The Pro Micro is similar to the Pro mini except with a ATmega32U4 on board. The USB transceiver inside the 32U4 allows us to add USB connectivity on board and do away with bulky external USB interface - 2.

DEVMO 2pcs Pro Micro ATmega32U4 5V 16MHz Micro-USB Development Module Board with 2 Row Pin Header Compatible Ard-uino Leonardo Replace ATmega328 Pro

The Micro is a microcontroller board based on the ATmega32U4, developed in conjunction with Adafruit. It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a micro USB cable to get started. It has a form factor that enables it to be easily placed on a breadboard.