PoE Splitter Power Over Ethernet Adapter Active 48V to 12V – RoboticsDNA

Specifications: Output port adapter: RJ45 male and male DC jack 5.5*2.1mm Data rate: 10/100Mbps Power Input: DC48V Power Output: DC12V 2A Data Output Port: RJ45 Male Devices will be detected before…

Simplify your Internet of Things with a passive PoE injector cable. These are quite handy for projects that have Ethernet connectivity and also need a power cable. Of course, you can get a long Ethernet cable but then you have to figure out how to plug it in, making a mess of wires.

adafruit-Passive PoE Injector Cable Set ADA435

Power over Ethernet (PoE) splitters can make your project wiring a breeze - and best of all they work to connect any 802.3af-capable router to any Ethernet device, even if it doesn't natively support PoE! The splitter takes a unified PoE signal (data and power) from one cable, and then separates the data (Ethernet) and power (+12VDC regulated) into two different lines for non-PoE devices.

adafruit-802.3af PoE Output Data & Power Splitter - 5/9/12v ADA3239

Inline Gigabit Mode B Step Up Splitter that Converts 12-30 Volts to 48

▶▶FEATURES: Power over Ethernet Splitter splits a PoE network cable from a PoE switch into a separate power and 100M Ethernet source, this is ideal

PwrON Active POE Splitter Adapter, 48V to 12V, IEEE 802.3af Compliant, 10/100Mbps up to 100 Meters for Surveillance Camera, Wireless Access Point and

Output Voltage: 5V/9V/12V DC adjustable voltage, up to 18-24watts Data Rate: 100/100/1000Mbps, full IEEE 802.3af compliant Input Voltage: DC 36-48V,

Active Gigabit PoE Splitter Adapter with Multi-Size Tips, IEEE 802.3af Compliant, DC 5V 9V 12V Power Output, for IP Camera AP Voip Phone and More

Simplify your Internet of Things with a passive PoE injector cable. These are quite handy for projects that have Ethernet connectivity and also need a power cable. Of course, you can get a long Ethernet cable but then you have to figure out how to plug it in, making a mess of wires.

adafruit-Passive PoE Injector Cable Set ADA435

Active PoE Splitter Adapter 48V to 12V IEEE 802.3af Compliant 10100

Output Power: 12V/1A, 15.4W, full IEEE 802.3af compliant. Widely use with most 12-volt devices. Input Power Voltage: DC 44-57V standard POE switches,

Active PoE Splitter - Power Over ethernet Splitter Adapter, 48V to 12V, IEEE 802.3af Compliant, 10/100Mbps PoE Splitter for Surveillance Camera, WAP

802.3af PoE Output Data & Power Splitter - 5/9/12V : ID 3239 : $24.95 : Adafruit Industries, Unique & fun DIY electronics and kits