NEMA 23 Motor Bracket (MBA12-C) for FK12

4.9 (181) · € 18.99 · In Magazzino

Motor Bracket made from steel. It has a NEMA23 flange that is compatible with most NEMA 23 Steppermotors. The bracket has datum surface on the bottom, that also has two 6mm dowel pin holes. These can be used to get the perfect alignment when placing back on a machine frame. Also the alignment between bearing and flange is within 0,02mm since the machining is done in one operation. When building a CNC machine or other special machine, this is an interesting part to have, since it saves a lot of time, that is normally spent on making a bracket. This bearingblock is compatible with the BF12 floating bearing block, (same height from datum surface). Most commonly the bearing block is used in combination with 20mm ballscrews. Component features: Compatible with NEMA23 frame size steppermotors (DamenCNC Leadshine etc) Steel Housing High Quality Product Made in TAIWAN 4 x M4x12 DIN912 bolts included for mounting the steppermotor 4 x M4x12 DIN 912 bolts included for mounting the FK12 fixed bearing block FK Fixed Bearing not included (don‘t forget to order it! FK12) Most often used with HIWIN 20mm ballscrews

Mocowanie silnika NEMA23 MBA12-C

SYK MBA12 Premium Motor Bracket Ball Screw Motor Housing Stepper Motor NEMA17 NEMA23 NEMA34 Bearing Seat Support unit FK12 BF12 - AliExpress

MBA6/8,10,12,15,20马达传动座,上海嵩阳贸易有限公司

Easy fit mounting bracket Contens: 1x Mounting bracket. (Other parts on on fig's not included) LEADTIME: 3-4 working days

Mounting Bracket for Nema 23 (for FK12 lager)

New DIY build - design suggestions/ideas welcome

Nema 23 Bracket for Stepper Motor and Geared Stepper Motor Alloy Steel Bracket - ST-M2

Pololu - Steel L-Bracket for NEMA 23 Stepper Motors

Plaquettes de frein : 8 erreurs à éviter lors de leur changement - Oovango, les plaquettes de frein

SYK MBA12 Premium Motor Bracket Ball Screw Motor Housing Stepper Motor NEMA17 NEMA23 NEMA34 Bearing Seat Support unit FK12 BF12 - AliExpress

Nema 23 Stepper Motor Mounting Bracket: All-metal motor mounting holder is of high-temperature resistance & abrasion resistance. Adopting the advanced anti-rust paint technique, makes the bracket for a long-term use. The size of Motor Bracket: 65 x 65 x 69mm/2.55 x 2.55 x 2.7. Durable iron plate thickness is 3mm. 90 degrees L shaped design for a good toughness, impact resistance, extremely durable.