Festool Portainserti magnetico BV 150 CE
5 (472) · € 26.00 · In Magazzino
FESTOOL 492540 - MW_20210319_0898 Portainserti magnetico BV 150 CE
Festool BH 60 CE-Imp Portainserti magnetico CENTROTEC
Cacciavite portainserti magnetico 30 in 1
More power with less vibration. The ETS EC 150 EQ is perfectly built for manual operation to reduce fatigue when carrying out overhead sanding work and a good feeling on edges, as well as convenient operation in any position. This sander is only 4-1/2 (116 mm) high, contains a brushless EC-TEC motor, and ergonomic housing geometry with perfectly balanced center of gravity.
Festool 576326, Random Orbital Sander ETS EC 150/3 EQ-Plus
Festool 492540 CENTROTEC Extra-long Magnetic Bit holder BV 150 CE
The unrivaled original for more than 30 years - The ROTEX RO 150 with three tools in one for coarse sanding, fine sanding, and polishing. Lighten the load of your tool kit while increasing the range of applications with just one tool for an extremely high material removal rate during coarse sanding, a super-fine result when fine sanding, and a perfect finish when polishing.
Festool 576028 RO 150 FEQ-Plus Rotex Sander
For coarse and intermediate sanding Dual bearing for a long service life Weighs only 3.9 lbs. (1.8 kg) for particularly effortless work Stepless speed
FESTOOL ETS 150/5 EQ-Plus Sys 3
FE497628 : Set di punte e inserti per giravite FESTOOL SYS 1 CE-SORT
FESTOOL Portainserti BV 150 CE 492540
For Festool Cordless Drills with CENTROTEC interface (for use in the WH-CE CENTROTEC Tool Chuck ). 6 Magnetic bit holder enables use of standard bits with Centrotec Chuck. The Centrotec shank is designed for use with the Festool Centrotec System, as well as with all standard or keyless chucks for no-slip performance. The Centrotec System was designed to provide a seamless transfer of force, eliminating bit slippage or marring of the drill bit.
FESTOOL 492540 Centrotec Bit Extension - 6 In.
Festool Inserto PZ PZ 1-25/10 – Montalbetti di Giorgetti