eSUN 3D 1.75mm PETG blue Filament 1kg (2.2lb), PETG 3D Printer Filament, 1.75mm Solid Opaque blue

4.6 (155) · € 17.99 · In Magazzino

Buy eSUN 3D 1.75mm PETG blue Filament 1kg (2.2lb), PETG 3D Printer Filament, 1.75mm Solid Opaque blue at
eSUN 3D Printer Filament: PETG Extrusion Temperature Range: 235 to 250 Plate temperature: 80~90 or without heated Printing speed: 30~60mm/s Moving speed: 30~60mm/s Advantages of PETG: PETG is an excellent which combines the advantages of both PLA and ABS. Odorless; Little shrage rate; hydrophobicity (Will not absorb water and as such clog the extruders); Outstanding toughness and high impact strength; Good liquidity (flows smoothly); High mechanical strength and excellent flexibility; Good glossy finish. Specifications: 1KG net (approximately 2.2 lbs) Filament with Clear Spool eSUN PETG 3D Printer Filament Vacuumed Sealed With Desiccant; 16 colors to choose from; Semi-Transparent Colors: blue, magenta, yellow, natural, green, orange; Solid Opaque Colors: solid black, solid white, solid red, solid blue, solid gray, solid green, solid yellow, solid purple, solid gold, solid silver 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Recommended Extrusion/Nozzle Temperature 235C - 250C Spool Diameter: 8 - Spool Width: 2.50 - Spool Hub Hole Diameter: 2.05 - Inner Circle Diameter: 3.5 WARNING: This filament - when used for 3D printing - can expose you and others in the same room to chemicals known to the State of California to cause cancer. www.p65Warnings.ca.gov ALWAYS USE THIS PRODUCT IN A WELL VENTILATED AREA.